JUNBANG equipment
Remote Control Tracked Snow Blower
The 800 mm snow blower uses an intake and discharge arrangement. The supplied literature lists a 350 mm clearing depth; actual work needs to match the confirmed instructions and snow conditions.
Review the full specification below and confirm the version included in your quotation.
Working specification
| Throw Width | 800 mm |
|---|---|
| Throw Height | 10-15 m |
| Clearing Depth | 350 mm |
| Nominal RC range, confirm conditions | 500 m |
| Voltage | 24 V |
| Travel Speed | 0-6 km/h |
| Engine | Loncin 196 cc with cold start |
| Continuous Working Time | 3-5 h |
| Fuel Tank Capacity | 3.6 L |
| Transmission Mode | Mechanical Clutch + Friction-disc Belt Drive + Gearbox |
| Drive Motor Type | 600 W Brushless |
Dimensions & packing
| Net Weight | Approx. 282 kg |
|---|---|
| Gross Weight | To be confirmed |
| Unit Dimensions | 1510 × 950 × 750 mm |
| Packing Dimensions | 1550 × 990 × 790 mm |
Model brochure figures for initial comparison. Confirm the final version, operating conditions and packed equipment before ordering.
Clear by directing the snow
The 800 mm snow blower uses an intake and discharge arrangement. The supplied literature lists a 350 mm clearing depth; actual work needs to match the confirmed instructions and snow conditions.
Confirm the discharge specification
The literature describes a 10–15 m throwing-height figure. Ask the supplier to clarify the applicable distance, direction and conditions rather than assuming a site clearance radius.
Need a different platform or working width?