JUNBANG equipment
Remote Control Tracked Snow Blade
The 1100 mm blade is intended for pushing and gathering snow. Site layout determines the route, the available turns and where the accumulated snow can remain.
Review the full specification below and confirm the version included in your quotation.
Working specification
| Push Width | 1100 mm |
|---|---|
| Voltage | 24 V |
| Pushing Depth | 400 mm |
| Nominal RC range, confirm conditions | 0-500 m |
| Travel Speed | 0-6 km/h |
| Engine | Loncin 196 cc with cold start |
| Continuous Working Time | 3-5 h |
| Fuel Tank Capacity | 3.6 L |
| Transmission Mode | Mechanical Clutch + Friction-disc Belt Drive + Gearbox |
| Drive Motor Type | 600 W Brushless |
Dimensions & packing
| Net Weight | Approx. 268 kg |
|---|---|
| Gross Weight | To be confirmed |
| Unit Dimensions | 1450 × 950 × 750 mm |
| Packing Dimensions | 1490 × 990 × 790 mm |
Model brochure figures for initial comparison. Confirm the final version, operating conditions and packed equipment before ordering.
Push snow into a planned storage area
The 1100 mm blade is intended for pushing and gathering snow. Site layout determines the route, the available turns and where the accumulated snow can remain.
Check route width before ordering
The blade width and full platform dimensions must be assessed together. Include obstacles, corners and the receiving or storage arrangement in the enquiry.
Need a different platform or working width?